Monarch,with,Kit,PBL,Stroboscope,,Nova-Strobe,LED,Industrial Scientific , Test, Measure Inspect,/limmer1194974.html,$734,inversionario.com,NIST,Portable $734 Monarch Nova-Strobe PBL LED Kit Portable Stroboscope, with NIST Industrial Scientific Test, Measure Inspect Max 55% OFF Monarch Nova-Strobe PBL LED Kit NIST with Stroboscope Portable $734 Monarch Nova-Strobe PBL LED Kit Portable Stroboscope, with NIST Industrial Scientific Test, Measure Inspect Max 55% OFF Monarch Nova-Strobe PBL LED Kit NIST with Stroboscope Portable Monarch,with,Kit,PBL,Stroboscope,,Nova-Strobe,LED,Industrial Scientific , Test, Measure Inspect,/limmer1194974.html,$734,inversionario.com,NIST,Portable

Max 55% OFF Soldering Monarch Nova-Strobe PBL LED Kit NIST with Stroboscope Portable

Monarch Nova-Strobe PBL LED Kit Portable Stroboscope, with NIST

$734

Monarch Nova-Strobe PBL LED Kit Portable Stroboscope, with NIST

|||

Product description

The Monarch 6232-011 PBL battery–operated, portable stroboscope has a 12-array LED light source, internal and external trigger modes, a 30 to 500,000 flashes/revolutions-per-minute (FPM/RPM) range, and a continuous duty cycle to provide stop-motion inspection and speed measurement. It is designed for motion analysis, preventive maintenance, printing inspection, and speed measurement of repetitive motion. The 12-array LED light source has an adjustable flash duration up to 14 degrees or 3000 microseconds and a light output of 3000 lux. LED lights have a longer bulb life and require less energy than xenon flash tubes and can extend the battery life of battery-powered stroboscopes, have a lower heat output, and quieter operation when used in audio testing. The flash rate range of 30 to 500,000 FPM/RPM has an accuracy of 0.002% of setting, or + or - 1 least-significant digit/0.01 FPM. A NIST Certificate of Calibration ensures accuracy. Built-in multiply-by-2 and divide-by-2 functionality allows the operator to distinguish true RPM from harmonics. Separate 3.5mm (1/8") transistor-transistor logic (TTL) input and output jacks provide power to remote sensors and allow multiple strobes to be daisy-chained to provide wider coverage. Tachometer mode, available for use while the stroboscope is in external mode, has a measuring range of 5 to 200,000 rpm and an accuracy of + or - 0.01% or 0.1 rpm (requires remote sensor, not included). External phase shift of 0.1 to 359.9 degrees and time delay range of 0.001 to 1000 milliseconds allow operator to manually adjust the focal point of the object to any point in the rotation without moving the trigger point. Manual internal phase shift allows the operator to view the object at any point in the cycle without moving the trigger point. The stroboscope can be powered by the internal NiMH rechargeable batteries or using the universal 115/230V AC power supply/recharger. The continuous duty cycle and the 115/230V AC power supply allow the stroboscope to be used continuously without the need for a cool-down period and the integrated 1/4" - 20 UNF (Unified Fine) thread enables the stroboscope to be mounted on a tripod for long-term use. The internal NiMH rechargeable battery has a typical life-span of 8 to 10 hours at 1800 FPM. The stroboscope includes a universal 115/230V AC charger with interchangeable wall plugs, a NIST Certificate of Calibration, a water-tight carrying case, and instructions. Stroboscopes are used in a variety of settings including manufacturing, printing, education, and photography.

Specifications
Flash rate range (FPM/RPM and VRPM) and accuracy 30 to 500,000 FPM/RPM, 0 to 200 VRPM with accuracy of 0.002% of setting or + or - 1 least-significant digit/0.01 FPM
Flash duration Adjustable to 14 degrees/3000 microseconds maximum
Time and phase delay 0.01 to 1000 milliseconds time delay, 0.1 to 359.9 degrees phase delay
Light source and output 12-array LED with 3000 lux at 6000 FPM, 8 inches (20cm), 2% duty cycle
Internal phase shift Manual adjustment
External phase shift features Phase, time, and automatic
External trigger TTL 24V DC maximum input provides 3.3V DC TTL output
Tachometer mode 0 to 500,000 RPM (requires remote sensor - not included)
Operating time 8 to 10 hours typical at 1800 FPM with battery or continuous duty cycle using 115/230V 50/60 Hz AC power supply/recharger
Power supply Internal NiMH rechargeable battery with 115/230 V, 50/60 Hz recharger
Dimensions Body: 3.66 x 3.56 x 9"/93 x 90 x 229mm
Reflector housing: 4.8"/122mm diameter
Handle: 4.254"/108mm
Weight 1.9lbs./860g

H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.

Stroboscopes evaluate the functionality of fast-moving rotational objects, such as belts, fan blades, and other machine parts. They are used in industries such as manufacturing, entertainment, high-speed printing, wood and metal turning, and in education and research settings. Stroboscopes have a flashing light (strobe) that, when directed at a moving object, makes the object appear to be stopped or moving in slow motion. This enables the operator to evaluate machine performance without stopping the machine. Stroboscopes use either xenon flash tubes or LED light sources. The strobe is triggered either internally, which allows the operator to manually adjust the flash rate, or externally and automatically by a peripheral sensor. Multiply-by-2 (2/4 or 2X) and divide-by-2 (1/2) functionality enables the operator to verify the actual revolutions per minute (RPM) and to distinguish true RPM from harmonics. Phase shift adjusts the flash delay in degrees of a full rotation, and time delay adjusts the flash delay in seconds or fractions of a second. Input and output features enable the operator to use peripheral sensors to trigger flash rates, to perform tachometer operations, or to daisy-chain stroboscopes.

Monarch Instrument manufactures devices such as tachometers, stroboscopes, data loggers, and leak detectors. The company, founded in 1977 and headquartered in Amherst, NH, meets International Organization for Standardization (ISO) standard 9001:2008.

What's in the Box?
  • Monarch 6232-011 Nova-Strobe PBL stroboscope
  • 115/230 Universal power cable/charger with USA and Euro cables
  • NIST Certificate of Calibration
  • Water-tight plastic carrying case
  • Instructions

Monarch Nova-Strobe PBL LED Kit Portable Stroboscope, with NIST

  • With XRDynamic 500, you know exactly where you’re going: Unbeatable XRD data quality and maximum user efficiency. The unique TruBeam™ concept drives optimal solutions for powder XRD, non-ambient XRD, PDF analysis, SAXS, and more. Fully automated optics and alignment routines make complex experiments intuitively simple. Whether you’re a novice or an expert, collect top-quality and error-free XRD data quickly. XRDynamic 500: Driving XRD.

    Find out more
  • Increase productivity, maximize returns, and fulfill all international standards, with Anton Paar’s high-performance, forward-looking asphalt and bitumen testing instruments. Ideal for refineries, distributors, consumers, and testing labs. Ideal for tomorrow’s petroleum world.

    Read more
  • Up to 6-digit accuracy. 4 digits in 20 seconds with ultra-fast mode. An intuitive smartphone-like experience with 30+ guided user workflows. The greatest display available anywhere. A half-century commitment to innovation and quality. One revolutionary measuring principle. Taking density measurement to the next level.
    The Next-Level Density Meter.

    Find out more
  • Say goodbye to searching for data you know you have, somewhere. Anton Paar’s new, intuitive, plug-and-play lab software connects, communicates, and stores your information where you can find it. In one place. Just a click away. AP Connect.

    Try it out.
  • Anton Paar introduces the new MCR Evolution rheometer series. Based on the feedback of more than 10,000 satisfied customers, we’ve made the world’s top-selling rheometer even better.  

    Read more
  • Cora 5001 is Anton Paar’s Raman spectrometer for quickly identifying substances, even through packaging. Super-sensitive, not just robust, Cora 5001 delivers the top-notch results you need, not just spectra. Whether you work in quality control, incoming goods inspection, teaching, or R&D – you benefit from the easiest guided workflows available

    Learn more
  • Anton Paar is currently filling 90 open positions across all subsidiaries and departments. Come join our team!

    Apply here
  • Anton Paar is currently offering the DMA 501 and DMA 1001 density meters at the lowest price points ever.

    Get your quote
  • Laboratory Instrumentation

    Anton Paar has a long history of providing high-end laboratory instruments: density meters, refractometers, polarimeters, instruments for sample preparation and synthesis, viscometers, rheometers, and instruments for material characterization.

    Laboratory Instrumentation

  • Process Instrumentation

    Anton Paar has your solution for inline production monitoring: The portfolio covers density and concentration sensors, inline refractometers, process viscometers and sensors for measuring dissolved CO₂.

    Process Instrumentation

  • Automation & Robotics

    Anton Paar designs custom-tailored automation solutions from the first idea to final production: sample changers for automating single devices, robotically operated rheometers and a platform which automates multiple instruments.

    Automation & Robotics

News

Act now!

Sustainability workshop at Anton Paar Thailand.

Anton Paar on Wheels

In 2021 many exhibitions and conferences got cancelled due to the COVID-19 pandemic. So, what to do,...

Investments in ecology

Anton Paar expands the photovoltaic system at the site in Graz.

skills.lab Academy for Kids

The "skills.lab Academy" supports children and young adults in their soccer development after months...

skills.lab Arena opens in California

The first skills.lab Arena in the USA opened in April. After two months of construction, soccer...

Anton Paar launches the Next-Level Density Meter

Although the measuring method itself has not changed in the last 50 years, the technological...

Anton Paar GmbH - Company Overview Information

Anton Paar develops, produces and distributes highly accurate laboratory instruments and process measuring systems, and provides custom-tailored automation and robotic solutions. It is the world leader in the measurement of density, concentration and CO2 and in the field of rheometry. Anton Paar GmbH is owned by the charitable Santner Foundation.

Over 3400 employees at the headquarters in Graz and the 33 sales subsidiaries worldwide ensure that Anton Paar products live up to their excellent reputation. The core competence of Anton Paar – high-precision production – and close contact to the scientific community form the basis for the quality of Anton Paar’s instruments. Read more

Anton Paar GmbH
Anton Paar Strasse 20
8054 GRAZ
AUSTRIA

Tel.+43 316 257 0
Fax.+43 316 257 257
info@anton-paar.com

Opening hours

Monday

07:00AM–05:00PM

Tuesday

07:00AM–05:00PM

Wednesday

07:00AM–05:00PM

Thursday

07:00AM–05:00PM

Friday

07:00AM–05:00PM

Saturday

Closed

Sunday

Closed

Anton Paar Austria GmbH – Vertrieb und Service Österreich
Ankerstraße 6
8054 GRAZ
AUSTRIA

Tel.+43 316 269 571
info.at@anton-paar.com

Opening hours

Monday

08:00AM–05:00PM

Tuesday

08:00AM–05:00PM

Wednesday

08:00AM–05:00PM

Thursday

08:00AM–05:00PM

Friday

08:00AM–01:00PM

Saturday

Closed

Sunday

Closed